Pneumatic Stainless Steel Full LIned Ceramic Ball Valve
You are here : Home \ Products \ Ceramic valves\ Ceramic Ball Valves
Pneumatic Stainless Steel Full LIned Ceramic Ball Valve
Bore Sizes:
NPS 1/2" to NPS 10"(DN15 to DN300)
Pressure Ratings:
Class150 to Class600 (PN10 to PN63)
Applications:
•Silicon powder
•Alumina powder
•Dry coal powder
•Limestone
•Cement
•Coal powder injection
•Metallurgical dust
•Thermal Power plant FGD
•Petroleum Solid Catalyst
Features:
•Design and Manufacture: API 6D/API 608
•Face-to-Face Dimension: ASME B16.10
•Flange Ends:  ASME B16.5
•Butt-welding Ends: ASME B16.25
•Pressure-Temperature Rating: ASME B16.34
•Inspection and Testing: API 598
•Body Material: forged stainless steel and duplex steel ,such as F304, F316, F304L, F316L, F51, F53
•Ball Material: Zirconia ceramics
•Seat&Lining Material: 99% Alumina ceramics
 
Features:

1. 3PC body design

 The three piece design of the valves allows direct connection to the existing pipelines without the need for pipe reducers in front and behind the valve.  We can fulfill the existing connection requirements of such as the face-to-face dimensions and the flange type.
 
2. Ceramic fully lined
 Ceramic components are assembled within the forged metal housing which absorbs the physical load and vibration of the piping lines.
Ceramic Full lined section view
 
3. Various Actuation Types
Actuator is connected by a yoke interface that meets ISO 5211. Most all 1/4 turn actuation including pneumatic and electric actuators. The yoke interface is re-movable and able to be easily modified to accommodate special applications. Manual hand levers and gear boxes are also available.

4. Corrosion Resistant
 Cold Isotactic Pressing (CIP) and high-temperature sintering nanometer high-purity 99.5% alumina and zirconia ceramics will not interact with almost all organic and inorganic chemicals, nor contaminate the process media. Their physically and chemically stability against most acids and alkalis will last for many years with little or no corrosive degradation.

5. Abrasion Resistant
 The hardness of 99.5% alumina ceramics is about HRA88 or above, harder than zirconia (about HRA85), about 8 times harder than stainless steel. As valve core, ceramic components make the valve done well in the most severe abrasive conditions, such as pneumatic conveying to transport silicon powder.

6. Ceramic-to-Ceramic spherical seated
 The perfect fine grinded spherical seal between the ceramic ball and seat ensure a Class VI shutoff.   The anti-scratch design between the  ball and seat,  which  prevent  the  deep  sealing  surface being marred and scratched by particles , and the ceramic  ball will not  be stuck anyway. 

7. V-port balls and Round-port balls
 FOYO offers each line size two different trims: Round-port and V-Port. In general, the round-port ceramic ball valve is often used as an on-off valve.  If precise and stable control  performance are highly required in any application, the V-port ceramic ball valve with equal percent characteristics may be the best choice.